Vehicles
195 not categorized PORSCHE 964 SOLD CARCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.96410605131 This fan hub sits between the cooling fan and the alternator. It should be checked periodically for noise as it contains a bearing which can fail. Please note: 964 106 051 30 has been superseded by 964 106 051 31. If you are replacing 964 106 051 30, you will also need 3 qty., part # 90007609101 to install the new superseded hub. Sold individually. 1 necessary per car.
From $191.40
Make a selection 96410628901 This cover sits above the heat shield 96411901403 on the right side of the engine. If you are removing the motor for maintenance be sure to check and replace the engine covers / heat shields as necessary. Sold individually. 1 necessary per car. View/Change Diagram
From $315.70
Make a selection 96420724104 This hose connects the front of the oil tank to the thermostat housing. We recommend replacing 2 qty. Clamps, part # 99951225202 when replacing this piece. Sold individually. 1 necessary per car. Please note: this will only fit the oil thermostat with part # 964 207 047 03 or 964 207 047 06. View/Change Diagram
From $15.85
Make a selection 96433106010 Original spring plates are beginning to fail now and unfortunately they are currently unavailable from the factory. With the 964 and 965 going up so much in value these days, we wanted to create suspension parts that look 100% oem. Our spring plates are manufactured in europe by an OEM supplier to Porsche using the finest materials (high carbon steel, 7075 t6 aluminum and 65 shore rubber - oe spec). View/Change Diagram
$583.00
Make a selection 96420724107 This hose connects the front of the oil tank to the thermostat housing. We recommend replacing 2 qty. Clamps, part # 99951225202 when replacing this piece. Sold individually. 1 necessary per car. Please note: this will only fit the oil thermostat with part # 964 207 047 05 or 964 207 047 07 or 964 207 047 08.
From $20.90
Make a selection 96420725214 This pipe connects to the oil filter console 96420702503 and to 96420725711. It acts as a backflow line from the oil filter. We recommend replacing the heat shielding wrap, part # 96420735200 when installing this pipe. This part is sourced in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. View/Change Diagram
From $210.00
Make a selection 96420725711 This pipe connects with the oil hose 96420724702 and the oil filter console line 96420725214. This part is sourced in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. View/Change Diagram
From $182.60
Make a selection 96430091100 Specifically fits the 964 c4 with the g64.00 / 01 / 02 manual transmission. Sold individually. 1 necessary per car. View/Change Diagram
From $225.50
Make a selection 96433102100RATK Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)
$672.10
Make a selection 96433370106 This is a genuine 20 mm thick, Porsche 964 c2 / c4 model rear sway bar for models from 1991-94 models with manual transmissions (m481 option). Please note: this item is a special-order item. Special-order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis. Sold individually. 1 needed per car. View/Change Diagram
From $304.85
Make a selection 96434106512 This is a high-quality replacement sourced in Germany, designed to perform like the original. Please check the "fits these models" tab for precise model fitment. This only fits the 964 c2 and c2 wide body. Sold individually. Left or right side fitment. 2 necessary per car. View/Change Diagram
From $682.83
Make a selection 96434330100 Original rubber strut / shock top designed to soften impacts and to prevent suspension damage. These get brittle and start to crack and break away as cars age. We recommend replacing them when installing new original type struts / shocks. It is also a good idea to replace the spacer sleeve, part # 96434351401 and strut / shock plate, part # 96434350700. Left or right side fitment. Sold individually. View/Change Diagram
From $16.95
Make a selection 96434306901 Replace your old drop links to reduce body roll and rejuvenate your cars handling in the corners. 964 c2 only with m030 factory sport suspension sold individually. View/Change Diagram
From $135.00
Make a selection 96434705805SP We are committed to Porsche cars and are very happy to release an inner tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM number, 964 347 058 05. We also suggest replacing your outer tie rods, we have a uniball option, our part # 96534703200sp or the OEM style, narrow body is part # 96434703200 or wide body is part # 96434703201 (qty. 2 are needed) and now is also...(choose a part on the right to read more)
$207.90
Make a selection 96437504381 Replace your worn-out, original soft rubber engine mounts with our higher density, rs specification rubber bushing. This is manufactured of rubber with a 75-shore hardness value. 75-shore is the same density as what is used in the rs models. It is more durable, provides more positive, sharper shifts and offers crisper throttle response. Yet, rs spec rubber is still quiet and comfortable for street use. Features: sharper shifts crisper throttle response does not produce nvh (noise vibration harshness) like teflon or solid bushings rubber has a shore hardness value of 75 (like rs models) made in Germany this mount is a high-quality OEM (original equipment manufacturer) replacement part, designed to perform like t...(choose a part on the right to read more)
From $199.99
Make a selection 96434703200SP We are committed to Porsche cars and are very happy to release an outer tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM number, 964 347 032 00. This is ideally suited for use with our monoball inner tie rod, part # 96434705805sp for the 964 c2 / turbo look or 965 or part # 96434705804sp for the 964 c4 or rs. Please note: this is not for the wide body. Sold indiv...(choose a part on the right to read more)
$322.21
Make a selection 96411068703 This is the rubber sleeve that links the intake manifold to the intake distributor. We suggest purchasing new hose clamps, for 993 models please order part # 99951234802 x 6 qty. (upper clamp) and part # 99951257700 lower clamp x 6 qty. For 964 models, please order 12 qty. Part # 99951234802. Please note: for the 993 models: for 94-95 c2 and c4 l-jetronic models only with engine #'s m64.05/06/07/08. Sold individually. 6 necessary per car. View/Change Diagram
From $8.94
Make a selection 9645550550070EQ Quality replacement headliner for original number, 964 555 055 007 00. This is made by dansk, they offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality, factory fitment and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
$207.90
Make a selection 96454303502 Necessary when replacing your right rear quarter window, as this seal retains the window in the body and prevents moisture from getting in. For 964 coupe models. Sold individually. 1 needed per car. Driver's side fitment.
From $90.50
Make a selection 9645550550050EQ Quality replacement headliner for original number, 964 555 055 005 00. This is made by dansk, they offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality, factory fitment and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
$207.90
Make a selection 96457201501 As with any fan, bearings can fail, they can draw a high number of amps or there can be an electrical failure. Replace as needed and odds are that if the left side has failed the opposing side may be on the way out also, the right side is part # 96457201601 sold individually. 1 necessary per car. View/Change Diagram
From $136.33
Make a selection FVD34101707ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection 964564201007EQ This is the perforated sunroof lining, it is made in Germany with original material. It is as close to the original as possible and is cut and trimmed to fit perfectly. This part replaces original part # 964 564 201 007 00 sold individually. 1 necessary per car.
$127.60
Make a selection 96457390100 The evaporator works with the condenser to extract heat from the air and cools it to the desired temperature. With time and corrosion, they can develop leaks on a seam or weld and must be replaced. Sold individually. 1 necessary per car. Please note: for 964 models, up to 1992, please order 1 x FVD63104500, 1 x 99970743441 and 1 x 99970725140 order to do so. View/Change Diagram
From $124.00
Make a selection 99335140787 This was the rotor used on the 964 cup / rsr / 964 cup / rsr / 993 cup / rsr / GT2 evo. This disc is a genuine motorsports replacement part. It is drilled and vented. Sold individually. The corresponding right side is part # 99335140887 all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$721.60
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |